產品目錄
Products
產品中心
進口SMC脈沖式油霧器，smc安裝步驟
進口SMC脈沖式油霧器，smc安裝步驟##集中多點潤滑。##通過微霧穩定給油。##可通過升壓器提供高于主空氣通路的壓力，這個壓差可以看做是油霧產生的壓差，因此主空氣通路的壓力下降很少。##僅通過調整油霧產生的壓差達到微霧恒定供給。##通過開關給油槽可在不停止通氣的情況下實現補油。##可通過給油孔觀察到微霧的產生情況
進口SMC脈沖式油霧器，smc安裝步驟
Mount the air pipes after sufficiently flushingthem.
2. When screwing in pipes or fittings, be careful
to avoid letting cutting chips from pipe screws,
sealant, etc. get mixed in.
When wrapping with pipe tape, be sure to leave
about two threads remaining unwrapped.
Intermittent discharge of small,
Mount the ALIP1000-01 with the OIL OUT
side facing upwards.
4. When using the oil tank while exposing it to
the outside air, mount it in a higher position
than the impulse lubricator.
5. Be sure there is enough space above the air
release knob to release the air.
constant amounts to the slidingparts
Directly supplies a constant
amount of oil just before the
lubrication point
進口SMC脈沖式油霧器，smc安裝步驟
| ||||||||||||||||
 |
| |||||||||||||||
| |||||||||||||||||||
 |
| ||||||||||||||||||
銷售部